INTRODUCTION
The ELECTROLYZER is specially designed as a
powerful visual demonstration tool to compare R.O.
purified water and untreated water through the
precipitation of solid*, making it the easiest way to
explain the unseen dissolved solid in portable water.
(Note: *Test results do not suggest that untreated water were
unsafe for consumption)
IMPORTANT:
READ WARNING INSTRUCTIONS
BEFORE USE
SIMPLE OPERATION
1. After unpacking the unit, use a dry cloth to wipe off
the layer of protective oil on each of the electrode.
2. Screw in each electrode on the base of the unit
according to the fitting screw size.
3. Fill a glass with tap water and another with R.O.
purified water.
4. Ensure that the switch is OFF and dip two of the
electrodes in each glass of water.
5. Plug the power plug into the A/C socket than
switch ON the unit.
6. The switch will light up. The untreated water will
gradually boil and solid precipitated; while the R.O.
water will remain crystal clear and cool.
7. Switch OFF the unit once the result is shown.
8. Unplug from the power socket then wipe-dry the
electrodes before storing away.
9. A thin layer of oil applied on the electrodes would
prevent rust developing on it.
