2 of 8
WARNING
•
•
Be sure to read this entire manual thoroughly and you
•
Sufficient expertise is required for installing this product. Be sure to subcontract the installation to a qualified person.
Ensure special attention to safety is paid during installation. Tranquil mount Ltd is not liable for any damage or
injury caused by mishandling or improper installation, or by installing anything other than the specified product.
Your Statutory Rights, (if any) are not affected.
If the safety precautions are not observed or the product is used incorrectly, it may result in serious injury or damage
to your wall and TV. This instruction manual shows the correct handling of the product and important precautions
necessary to prevent accidents. Be sure to read this manual thoroughly and use the product correctly. Keep the
manual available for future reference.
•
Ensure your hands and fingers stay clear from the adjustable moving mechanics at the back of the bracket. This is
to avoid your fingers getting trapped. Please supervise children when this product is in use.
•
This product is supplied with small parts for installation. For your children’s safety, please keep out of reach of chi-
ldren at all times.
fully understand all the instructions and warning before
attempting to begin your installation.
Before you begin installation, please verify that all components are included and undamaged. If any parts are missing or damaged,
contact Tranquil Mount Ltd or the store you purchased from. Never proceed with missing or damaged parts. Lay out all components
and make sure you identify that each one has a match in the diagram. Some of the parts included will not be used during installation.
Do not proceed if you do not understand and identify all of the components.
We recommend in order to have a better installation, it is necessary to have in-wall wiring or wall AV and power plates installed to
hide the cords behind the wall. We advise you get a professional installer to do this.
Table of Contents
Parts List ........................................................................................................................................................................ 3
8
7,
Installation of Screen & adjustment of the spring pressure & Elevation adjustment
.......................................................
Installation of the bracket
.......................................
....................................
...................................................................
5, 6
..........................
..........................
.................................................................................. ...........................
8
Product dimensions
Critical requirements of the installation
. .
.. .
. .
.. . ......................................................................................................... 4
Tools required for assembly
Required Tools
Optional Tools
40mm
6mm 10mm
www.tranquilmount.co.uk
•
This product should only be installed by someone who has a basic knowledge of buildings construction, installations
and fully understands these instructions.
•
Make
•
In order to have a better installation, it is necessary to have in-wall wiring or wall AV and power plates installed to
hide the cords behind the wall. We advise you get a professional installer to do this.
sure that the supporting surface will safely support the combined load of the mount, the display and all
attached hardware and components.
•
This wall bracket will only support flat panel displays (LCD, Plasma). The maximum load capacity is 32kg.
•
If mounting to a wall of wood stud construction, be sure that mounting bolt are anchored to the centre of the stud,
when installing the TV mount on a concrete wall, the wall must be at least 8"(203mm) thick with a minimum
compressive strength of 2500 to 3000 psi (17.2 to 20.7 MPa), the concrete wall must meet ASTM C39. When installing
the TV mount on a cinder block wall, the cinder blocks must meet ASTM C216 specifications and have a minimum
nominal width of 8” (203mm). Be sure to mount in a solid part of the block, generally 1"(25 mm) minimum from the
side of the block. Do not drill into mortar joints! If plaster/drywall is thicker than 16mm, custom fasteners must be
supplied by the installer.
•
Always have someone assist you to lift and position your equipment.
•
T
•
Screws must be tightly secured, but do not overtighten any screws (especially the four hex bolt screws M8x63.5mm)
or damage can occur and product may fail.
ighten screws and bolts firmly, but do not over tighten. Over tightening can damage the items and greatly reduce
their ability to hold. Please refer to suggested torque values where applicable in these instructions.
