Step13
Step14
Step15
Step16
Step11
Step12
Step9
Step10
4 of 4
Extended panel installation, since the panel is relatively
heavy, need two people carrying both ends to maintain
a balance when tightening the nuts.
Repeat steps 7,8,9 installation method to install a third
aluminum extrusion and the second panel.
screws
M6x12
M6x25
M8x12(don’t need washer 2)
M8x25(don’t need washer 2)
spacer 17.0x 9.0x14.0
Monitor Bracket
Monitor Bracket
(Flat screen is not provided)
(Flat screen is not provided)
WASHER 2
x
y
TVcs
cs
y
After two panels installed, according to the width of the
TV to adjust the distance between the two panels, the distance
between the two panels is equal to the width of the TV.
Secure the interface arms to the mount using
Don't forget to put
the end caps on, don’t use too much strength so as to
damage them.
Tigh
Each monitor bracket has independent front and back up and down
adjustment function, the adjustment amplitude is 20mm.
ten the screws in various parts.
M8 Nut
washer 1 (
black
)
8.2x 16x1.5
washer 2 (
White
)
6.2x 16x1.5
