26 User Manual
5.4.1.5. Ethernet Settings
when pressing the
“
enter” key, you will find a pull-down menu. Choose “
Ethernet Settings
” menu and
press “enter” to get into
Ethernet Settings
state. In this menu, user have two choice:
obtain IP address
automatically and fixed IP address. if user choose to obtain IP address automatically, it can obtain
current IP and mask automatically. if user choose to fixed IP address, it need user input IP and mask .
Figure 5-11
Power Management
Interface
Notes:
1) This operation step requires password (default value: 1001).
2) Suggesting user to choose IP address automatically
5.4.2. Energy yield
Press the “enter” key, and then you will find a pull-down menu. Please move the cursor to “E-Week”
by pressing the “up” or “down” key, then press “enter”, the relevant information will be shown.
(E-Week is default status)
Figure 5-12 week Energy Wave
Using the same operating procedures, you can check “E- Month”, “E-Year”.
5.4.3. Inverter state
Press the “OK” key, and then you will find a pull-down menu. Please move the cursor to “inverter
state” by pressing the “up” or “down” key, and then press “enter” key, the related information at
AC,DC,
frequency and temperature will be shown. If you press “ESC” key, you can exit this
interface.
Figure 5-13 Inverter state Interface