Trango brodband TrangoLINK-10-EXT Professional Installation Manual Download Page 2

 

RU Antenna Alignment 

TrangoLINK-10-EXT   Professional Installation Guide

 

 

Trango Broadband Wireless – Rev. A 

Page 

2

 

 

Overview 

This manual covers basic configuration and installation of the TrangoLINK-10-EXT system which consists of two 
radios, P5830S-MU-EXT (Master Unit) and P5830S-RU-EXT (Remote Unit).  Since these devices require manual 
maximum power limit settings (for 5.25-5.35 GHz U-NII band operation only), they are classified by the FCC as a 
professional install devices.  To be in compliance with FCC guidelines, the radios must be installed with one of 
several approved antennas listed in this document. 
 
The P5830S-MU-EXTR and P5830S-RU-EXT are currently FCC certified for use with three external antennas

.  

Antenna 

Part 

 Description 

  Gain 

 

AD5830-24-D 

 18” 

DSS 

Dish 

 

  24 

dBi 

AD5830-23-D 

 15” 

Flat 

Panel 

  24 

dBi 

SPD3-5.2 

 

3’ Dish from Radiowaves   

31 dBi 

 
The P5830S-MU-EXT Master Unit works in conjunction with the P5830S-RU-EXT Remote Unit.  Please see the 
TrangoLINK-10 User Manual for general information on overall system implementation, configuration, and 
management of these radios.  The TrangoLINK-10 User Manual also covers many important aspects of  radio 
configuration and management which is applicable to the TrangoLINK-10-EXT.   

FCC Information 

This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference 
received, including interference that may cause undesired operation. 
 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed 
and used in accordance with these instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in any particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, 
the user is encouraged to correct the interference by one of more of the following measures: 
 

1)  Reorient the antenna;  
2)  Increase the separation between the affected  equipment and the unit;  
3)  Connect the affected equipment to a power outlet on a different circuit from that which the receiver is 

connected to;  

4)  Consult the dealer and/or experienced radio/TV technician for help. 

 
FCC ID: NCYM5830SSUEXT 
Canada: to be announced 
 
IMPORTANT NOTE: 

Intentional or unintentional changes or modifications must not be made unless under the express consent of the 
party responsible for compliance. Any such modifications could void the user’s authority to operate the equipment 
and will void the manufacturer’s warranty. To comply with FCC RF exposure requirements, the  following antenna 
installation and device operating configurations must be satisfied. The antenna for this unit must be fixed and 
mounted on outdoor permanent structures with a separation distance of at least two meters from all persons. 
Furthermore, it must not be co-located or operating in conjunction with any other antenna or transmitter. 
 

Warranty Information 

Radios from Trango Broadband Wireless are warranted from one year from date of purchase.  Please see 

www.trangobroadband.com

 for complete description of warranty coverage and limitations.

Summary of Contents for TrangoLINK-10-EXT












Reviews: