Trane XB 13, Product & Performance Data, Page: 5 / 14

22-1769-07 5
General
Data
Product Specifications
Model No.
1
2TTB3042A1000C 2TTB3048A1000C 2TTB3060A1000C
Electrical Data V/Ph/Hz
2
200/230/1/60 200/230/1/60 208/230/1/60
Min Cir Ampacity 21 25 33
Max Fuse Size (Amps) 35 40 50
Compressor RECIP RECIP SCROLL
RL Amps - LR Amps 15.4 - 93.5 18.6 - 93.4 25.3 - 146
Outdoor Fan FL Amps 1.4 1.4 1.3
Fan HP 1/6 1/6 1/4
Fan Dia (inches) 27.6 27.6 27.6
Coil Spine Fin™ Spine Fin™ Spine Fin™
Refrigerant R-22
(Not factory supplied) 6/13-LB/OZ
8/14-LB/OZ 8/11-LB/OZ
Line Size - (in.) O.D. Gas
3
7/8 1-1/8 1-1/8
Line Size - (in.) O.D. Liquid
3
3/8 3/8 3/8
Dimensions H x W x D (Crated) 38.4 x 35.1 x 38.7 46.4 x 35.1 x 38.7 46.4 x 35.1 x 38.7
Weight - Shipping 283 307 280
Weight - Net 249 271 244
Start Components YES YES NO
Sound Enclosure YES NO NO
Compressor Sump Heat NO NO NO
Optional Accessories:
4
Anti-short Cycle Timer TAYASCT501A TAYASCT501A TAYASCT501A
Evaporator Defrost Control A/C AY28X079 AY28X079 AY28X079
Rubber Isolator Kit BAYISLT101 BAYISLT101 BAYISLT101
Crank Case Heater Kit BAYCCHT300 BAYCCHT300 BAYCCHT300
Hard Start Kit Scroll BAYKSKT263
Extreme Condition Mounting Kit BAYECMT001 BAYECMT001 BAYECMT001
Refrigerant Lineset
5
TAYREFLN3* TAYREFLN4* TAYREFLN4*
AHRI Standard Capacity Rating Conditions
AHRI STANDARD 210/240 RATING CONDITIONS —
(A) Cooling 80°F DB, 67°F WB air entering indoor coil,
95°F DB air entering outdoor coil.
(B) High Temperature Heating 47°F DB, 43°F WB air entering
outdoor coil, 70°F DB air entering indoor coil.
(C) Low Temperature Heating 17°F DB, 15°F WB air entering
outdoor coil, 70°F DB air entering indoor coil.
(D) Rated indoor airflow for heating is the same as for cooling.
AHRI STANDARD 270 RATING CONDITIONS — (Noise
rating numbers are determined with the unit in cooling opera -
tion.) Standard Noise Rating number is at 95°F outdoor air.
Accessory Description and Usage
Anti-Short Cycle Timer — Solid state timing device that
prevents compressor recycling until 5 minutes have elapsed
after satisfying call or power interruptions. Use in area with
questionable power delivery, commercial applications, long
lineset, etc.
Evaporator Defrost Control — SPST Temperature actuated
switch that cycles the condenser off as indoor coil reaches
freeze-up conditions. Used for low ambient cooling to 30°F
with TXV.
Rubber Isolators — 5 large rubber donuts to isolate con -
densing unit from transmitting energy into mounting frame or
pad. Use on any application where sound transmission needs
to be minimized.
Hard Start kit — Start capacitor and relay to assist compres -
sor motor startup. Use in areas with marginal power supply,
on long linesets, low ambient conditions, etc.
Extreme Condition Mount Kit — Bracket kits to securely
mount condensing unit to a frame or pad without removing
any panels. Use in areas with high winds, or on commercial
roof tops, etc.