Trane TruSense RMWH, Installation, Operation And Maintenance Manual

Page: 31 / 68

Routine Operation
RMWH-SVX001C-EN 31
Note: The Hold feature can only be applied to one point
at a time. During the hold duration for the selected
point, the
Hold button is inactive for all other
points until the hold duration for the selected point
has completed.
Predictive Warnings
When a point goes above the acceptable threshold for flow
rate, sensor performance, or pump performance, a
predictive warning pop-up shows on the dashboard.
Predictive warnings indicate that it may be necessary to do
troubleshooting or replace a part, not that there is a critical
issue with the flow rate, sensor, or pump.
To acknowledge the predictive warning and return to the
dashboard, select
Acknowledge .
Acknowledging the predictive warning triggers a
notification that shows on the
Diagnostics button on the
dashboard.
A corresponding notification also shows on the
Diagnostics screen. For information about diagnostics,
refer to “Diagnostics,” p. 41 .
Cautions, Warnings, and Alarms
Cautions, warnings, and alarms can be triggered by non-
latching or latching events. Non-latching events do not
require user interaction for resolution. Latching events
require user interaction for resolution.
When an event occurs, a pop-up shows on the dashboard.