4
5
6
©2020 Trane
Trane has a policy of continuous product and product data improvement and reserves
the right to change design and specifications without notice. We are committed to using
environmentally conscious print practices.
Trane - by Trane Technologies (NYSE: TT), a global climate innovator - creates
comfortable, energy efficient indoor environments for commercial and residential
applications. For more information, please visit trane.com or tranetechnologies.com.
Removing/Installing the Enclosure Door
Removing the Enclosure Door
1. Open the door at a 90° angle from the enclosure as shown in the figure
below.
2. Lift the door to pull the hinge pegs from the hinge holes as shown
below.
Operator Display Connectors
Installing the Enclosure Door
Before installing the enclosure door:
• Unpack the enclosure door and check for missing or damaged parts.
• Ensure that the touch screen and magnetic latches are installed.
• Check for cracks in the plastic.
1. Hold the door at a 90° angle from the enclosure door as shown in
Panel 4.
2. Align the pegs on the door with the hinge holes on the enclosure door.
3. Lower the door until it rests securely in the hinge holes.
4. Verify that the door swings freely on the hinges and that the magnetic
latches hold the door securely when it closes.
5. Connect the operator-display cable to the operator display and the
main board.
Note:
The operator display cable passes beneath the termination board
on those enclosures with factory-installed operator displays.
6. Secure the operator-display cable to the enclosure with a wire or
plastic tie.
Adjusting Brightness/Contrast on the Operator Display
Note:
Contrast adjustment is not available on all computer display
models.
Tracer MP581 or Tracer AH541
1. On the Home screen, press the
Setup
button.
2. Press the
Page Down
button to view the next screen.
3. Press the
Adjust Brightness and Contrast
.
4. To increase the brightness, press the buttons along the top row (in
sequence) from left to right. To decrease the brightness, press the
buttons from right to left.
5. To increase the contrast, press the buttons along the bottom row (in
sequence) from left to right. To decrease the contrast, press the
buttons from right to left.
6. Press the
Home
button.
BMTX
1. On the Home screen, press the
Setup
butto.
2. Press the
Backlight and Contrast
button.
3. To increase the brightness, press the buttons along the top row (in
sequence) from left to right. To decrease the brightness, press the
buttons from right to left.
4. To increase the contrast, press the buttons along the bottom row (in
sequence) from left to right. To decrease the contrast, press the
buttons from right to left.
5. Press the
Home
button.
Agency Listings and Compliance
The European Union (EU) Declaration of Conformity is available from
your local Trane® office.
BAS-SVN107H-EN 28 May 2020
Supersedes 3270 3395 G (Mar 2016)
