10
CNT-SVX09E-EN
Mounting the Module
This Section provides information about the following:
•
Location recommendations
•
Operating environment requirements
•
Mounting recommendations
Location Recommendations
Trane recommends locating the MP503:
•
Near the controlled equipment to reduce wiring costs
•
Where it is easily accessible for service personnel
•
Where public access is restricted to minimize the possibility of tampering or vandalism
Operating Environment Requirements
Operate the MP503 in an environment that meets the following requirements:
•
Temperature: –40°F to 158°F (–40°C to 70°C)
•
Relative humidity: 5–95%, non-condensing
Mounting Recommendations
Important:
Leave the cover on when mounting the MP503 to avoid the possibility damaging the
circuit board during installation.
Mounting recommendations are as follows:
•
Mount the module in any direction, other than with the front of the cover facing downward.
•
Mount using the two 3/16 in. (4.8 mm) radius mounting holes provided (refer to
).
Mounting fasteners are not included.
•
Attach the module securely so it can withstand vibrations of associated heating, ventilating,
and air-conditioning (HVAC) equipment.
•
If the module is mounted in a small enclosed compartment, complete all wiring connections
before securing the module in the compartment.
Figure 4.
Mounting the MP503
