GSM Short Message Alarm & Remote Control
13.2 GSM SHORT MESSAGE REMOTE CONTROL continued
Users send order message to GSM module, then controller will make actions according to this SMS order and
pass back corresponding operations information. Controllers only execute the orders by pre-set. Detail orders
as following:
No.
SMS Orders
Pass Back Information
Description
4
SMS MANUAL
MODE
SMS MANUAL MODE OK
Set as manual mode
5
SMS AUTO
MODE
SMS AUTO MODE OK
Set as auto mode
6
SMS DETAIL
Pass back information
includes: Working Mode;
Generator Voltage;
Generator Frequency; Bat-
tery Voltage; Charger Volt-
age; Speed; Total Run Time;
Genset
Status; Alarm Status
Gets details information of genset.
NOTE:
Its national and area codes must be added. e.g. China: 8613666666666
NOTE:
When sending orders, users need to follow SMS orders in above form and all the letters must be capital.
29
032-5094-1A-EN
