Thermostat
Model TZEMT400BB32MAA
Installation, System Setup, and
Enrollment Instructions
Customer Service: (877) 288-7707
1
WARNING
Voltage hazard. Can cause electrical shock or equipment damage. Disconnect power to heating and cooling
equipment before beginning installation.
2
Remove the existing thermostat cover from the wall plate. Leave
wires attached.
Consult instructions that came with existing thermostat as needed.
Wall plate
Thermostat cover
The look of your existing
thermostat may vary
Physical Installation and Wiring
The Trane Thermostat
is compatible with single and multistage forced air
systems, including:
• Gas furnace systems
• Oil furnace systems
• Electric furnace systems
• Heat pump systems
• Air conditioning systems
The Trane Thermostat
may be compatible with some other system
types, including:
• Boiler systems
• Geothermal systems
• Multi-zoned systems
Call (877) 288-7707 to verify compatibility.
The Trane Thermostat
is not compatible with the following system types:
• Radiant floor systems
• Wall heating systems
Also, the Trane Thermostat
is not compatible with dual fuel systems
(gas furnace & heat pump combined) without adding a special kit. See
Note below.
• Note about dual fuel systems: This thermostat is not compatible
with dual fuel systems (heating system with both heat pump
and gas furnace), unless the system is controlled with a dual
fuel accessory relay kit. If you are unsure whether your dual fuel
system is controlled with this accessory or if you need a dual
fuel kit, please contact a qualified heating and cooling contractor.
Tools Needed
1/8”
#2
Bridge requires one 9-Volt battery for
enrollment process. Battery not included.
For professional installation service, instructions, operation guide, and installation video modules, please visit
link.schlage.com
Customer Service hours of operation:
• Monday-Friday 9.00am-7:00pm EST
• Saturday 11:00am-6:00pm EST
• Sunday 11:00am-4:00pm EST
To use the remote features of this thermostat, a Schlage LiNK
TM
account is required. Schlage LiNK™ online setup requires
broadband internet service and router with available port.
