5
PTEC-M-1A
General
Information
Model Number
All standard products are identified
by multiple-character model
numbers that precisely identifies a
particular type of unit. An
explanation of the alphanumeric
identification code used with
Packaged Terminal Air Conditioners
is provided below.
Use of the service model number
will enable the owner/operator,
installing contractors, and service
technicians to define the operation,
components and options of a
particular PTEC or PTHC unit.
Important! Be sure to refer to the
model number stamped on the unit
nameplate when ordering
replacement parts or requesting
service.
All product model and serial
nameplates carry an additional
number called the manufacturing
number. It is possible to have one or
more like products with the same
model number, but that a portion of
the parts would not be
interchangeable.
The manufacturing number has
been added to the product to assist
the service department in identifying
any given product. It is extremely
important when looking up service
repair parts in the parts list, or when
requesting service information, that
the manufacturing, model and serial
numbers be used to properly identify
the product.
Chassis Model Number
Breakdown
P T E
C 090 1
G
* C
1 2 3
4 567 8
9 10 11
Digits 1,2
Packaged Terminal Air Conditioner
Digit 3
Unit Type
E = Air Conditioner
H = Heat Pump
Digit 4
Development Sequence
C = Third Development
Digits 5,6,7
Unit Cooling Capacity
070 = 7,000 Btuh
090 = 9,000 Btuh
120 = 12,000 Btuh
150 = 15,000 Btuh
Digit 8
Main Power Supply
1 = 230-208/60/1
2 = 265/60/1
Digit 9
Electric Heating Capacity
O = None
C = 1.5 kW
E = 2.5 kW
G = 3.5/3.7 kW
J = 5.0 kW
Digit 10
Design Sequence
*C Design Sequence for 7, 9, 12K Btu
D Design Sequence for 15K Btu
Digit 11
Miscellaneous
A = Standard
B = PowerVent
C = Corrosion-Resistant Unit
D = Condensate Disposal Pump
F = Hydronic w/Power Vent and Door
G = Hydronic w/Power Door
H = Hydronic w/Manual Door
J = Power Door
K = Cond. Pump and Power Vent
L = Cond. Pump and Power Door
Summary of Contents for PTEC-070
