5
SVU-MCXA_GB-EX (R410A)
Infrared Remote Control
Name and function of buttons
1. Infrared Signal Transmitter
Transmits the signal to indoor unit.
2. POWER Button
Press this button to start unit operation.
Press this button again to stop unit
operation.
3. Temperature Setting Button
TEMP : Press this button to increase
the set temperature.
TEMP : Press this button to decrease
the set temperature.
4. FAN SPEED Button
Press this button to select fan speed.
5. MODE Button
Press this button to select system
operation mode. In cooling only system,
a mode is selected in sequence as FAN,
COOL, DRY, and back to FAN. In
cooling and heating system, a mode is
selected in sequence as FAN, COOL,
DRY, HEAT, AUTO, and back to FAN.
6. LOUVER Button
Press this button to adjust blade
direction.
7. SWEEP Button
Press this button to activate or
inactivate sweep motor to distribute air
flow.
8. FRONT BLADE Button
Press this button to activate or
inactivate front blade function.
9. ON TIMER Button
Press this button to set the on timer of
the unit operation.
10. OFF TIMER Button
Press this button to set the off timer
of the unit operation.
11. CLOCK Button
Press this button to set the clock to
the present time or see the present
time after ON or OFF TIMER was set.
12. LIGHT Button
Press this button to turn on the LCD
light.
13. POWERCOOL Button
Press this button to accelerate
capacity up.
14. ECONO Button
Press this button to save energy.
Wireless Remote Control
15. SLEEP Button
Press this button to control
temperature while sleeping and
press this button again to cancel.
16. SEND Button
Press this button to confirm the
operation of the unit according to
the LCD display or press and hold
for 5 seconds to toggle
temperature unit between Celsius
and Fahrenheit.
Installation of Batteries
1. Slide the back cover of the remote
control down to take it off.
2. Insert two dry batteries into the slot.
Be sure that the + and – directions
are correct.
3. Fix the back cover to the remote
control as before.
Attentions
•
Batteries can be used approximately
for one year under normal conditions.
•
Always replace an identical type of
two batteries at the same time.
•
Do not use manganese dry batteries
since they may cause a malfunction.
•
Do not use rechargeable (Ni-Cd)
batteries, because such batteries may
differ from standard dry cell batteries
in shapes, dimensions, or performance.
•
Take out all batteries if you are not going
to use the air-conditioner for a long
period of time.
Indicators on Infrared Remote
Control
1. CLOCK
Displays present time.
2. ON TIMER
Display ON TIMER when ON TIMER
is set.
3. OFF TIMER
Display OFF TIMER when OFF TIMER
is set.
SVU-MCXA_GB-EX (R410A).indd
21/11/2017, 11:27 AM
5
