22
Figure PD-1 –Model CVGF Cooling Only
With Unit-Mounted Starter
Figure PD-2 –Model CVGF Cooling Only Without Unit-Mounted
Starter (for Remote-Mounted Starter)
CL1 at either end of machine and is required for tube pull clearance.
CL2 is always at the opposite end of machine from CL1 and is for water box plus clearance.
– Recommended clearance (D1) for machine with unit mounted starter is 914 mm (36”)
– Recommended clearance (D2) for machine without unit mounted starter is 1219 mm (38”)
Unit length is not included for the waterbox.
See page 23 for waterbox dimension
Dimensions – SI Units (English Units)
Clearance
Unit Dimensions
Unit Dimensions
Tube Pull
With Unit Mounted Starters
Without Unit Mounted Starters
Comp
Shell Size
CL1
CL2
Length
Height
Width
Width
400-500
500
4235 mm
1118 mm
4083 mm
2094 mm
1984 mm
1929 mm
(13' 10 3/4")
(3' 8")
(13' 4 3/4")
(6' 101/2")
(6' 6 1/8")
(6' 3 15/16")
500
700
4235 mm
1850 mm
4083 mm
2200 mm
2038 mm
1988 mm
13' 10 3/4")
(3' 11")
(13' 4 3/4")
(7' 2 5/8")
(6' 8 1/4")
(6' 6 1/4")
650
700
4235 mm
1850 mm
4083 mm
2270 mm
2083 mm
2076 mm
13' 10 3/4")
(3' 11")
(13' 4 3/4")
(7' 5 3/8")
(6' 10")
(6' 9 3/4")
800-1000
1000
4235 mm
1219 mm
4083 mm
2521 mm
2305 mm
2257 mm
13' 10 3/4")
(4')
(13' 4 3/4")
(8' 3 1/4")
(7' 6 3/4")
(7' 4 7/8")
CTV-PRC001-E4
50 and 60 Hz SI (English Units)
Physical Dimensions
