background image

27 

48663983 Rev 1

Contents

unavoidable circumstances vis-a-vis the import of supplies and raw material or if the company is otherwise prevented from performing 

its functions under this warranty.

14. 

While  the  company  undertakes  responsibility  to  supply  only  the  compressor  free  of  cost  during  warranty  period,  cost  of  labour, 

transportation and other incidental expenditures shall be borne by the customer after the lapse of 

fi

rst year Product warranty.

15. 

In areas where voltage 

fl

uc/-10% of rated or usable voltage, customer is advised to use a branded voltage stabilizer which steps 

up or down the incoming voltage to give an output of 230V. For any 

fl

uctuation beyond the reasonable speci

fi

ed limit, the company 

shall not be responsible and this warranty shall immediately stand terminated.

16. 

Earthing provision is necessary for safety. Improper domestic wiring leading to hazards such as shock or 

fi

re is not covered under this 

warranty.

17. 

While the Company will make every e

ff

ort to carry out the repairs at the earliest, it however is made expressly clear that the company is 

under no obligation to do so in a speci

fi

ed period of time.

18. 

Any special, indirect or consequential property or commercial damage of any nature whatsoever is not covered under this warranty.

19. 

The warranty is issued at Bangalore, and Courts at Bangalore shall have exclusive jurisdiction over matters covered or 

fl

owing from this 

warranty.

20. 

The 1 year warranty is applicable to all parts except for Plastic & Rubber parts.

Warranty is null and void in the following cases:

1. 

Warranty card is not duly 

fi

lled and mailed back to the service centre for registering the Product within three months of purchase.

2. 

Complete warranty card is not presented to authorized personnel at the time of repair.

3. 

Product is not used according to the instructions given in the user manual.

4. 

Original serial number is removed/tampered with.

5. 

Modi

fi

cation or alteration of any nature whatsoever is made in the electrical circuit/physical construction of/to the Product.

6. 

Installation/repair work carried out by person/agency other than authorized agency.

7. 

Site conditions that do not con

fi

rm to the recommended operating conditions of machine.

For any product related assistance, please call on Toll free number: 1800 102 9986.

Summary of Contents for CN 1 Series





























Reviews: