10
ACC-SVN67D-EN
Installation
11. Secure the electric heater element assembly with the necessary amount of screws.
12. Slide the electric heater control panel/access door assembly inward until the rear edge engages
with retaining clips. See
Figure 3
. For the BAYHTRS, BAYHTRT, BAYHTRU, and BAYHTRW kits,
secure the outer edge with 2 screws. The BAYHTRA, BAYHTRB, and BAYHTRD kits will secure
the control panel with screws at the top against the vestibule panel and against the indoor
divider panel. See
Figure 7
.
Figure 5.
Figure 6.
GUIDE ROD
GUIDE ROD
SUPPORT BRACKET
SUPPORT BRACKET
LOCATOR TABS
SCREWS NOT
REQUIRED ALONG
THE TOP
SCREWS
FILLER PANEL
SCREWS