Trane BAYECON355 Series, Installation Manual

Page: 6 / 24

6 RT-SVN044A-EN
Figure 2. Hood assembly
2b
2a
2e
2c
2d
3. Remove Filter access panel and O/A cover panel
from the RTU. Retain unit screws for attaching
economizer and hood. See
Figure 3, p. 6 .
Figure 3. Unit image
Filter Access Panel
O/A Cover Panel
4. Install economizer assembly over the unit’s vertical
R/A opening, then attach the economizer to the RTU
side post using the existing holes in the RTU and
pre-punched holes on the economizer. See
Figure
4, p. 6 .
Figure 4. Economizer assembly installation
Economizer
Side Post
Side Post
5. Connect the unit harness to the economizer
harness. See the figure that follows. Additionally,
connect the green, purple, white, and orange loose
wires with male ¼–inch quick connects, next to the
unit harness, to the green, purple, white, and
orange female ¼–inch quick connects from the
economizer controller harness. Install economizer
hood over the economizer assembly. See
Figure 5,
p. 6 .
Figure 5. Economizer hood installation
Economizer
Hood
Side Post
Side Post
Economizer Harness
Unit harness
DETAIL A
SCALE 1 : 4
Economizer
Harness
Unit Harness
6. Reinstall the RTU filter access panel. See Figure 6,
p. 7 .
P Prre e--IIn nsstta alllla attiio on n