8
18-HH36D1-1A-EN
c. Re-install the fan shroud and unit top. See
.
Figure 12.
Fan Shroud and Unit Top Installation
Unit Top
R
Re
e--IIn
nsstta
allll C
Co
on
nttrro
oll C
Co
ov
ve
err B
Bo
ox
x
1. Once all previous steps are completed, remove the
bottom cover plate. See
Figure 13.
Bottom Cover Plate Removal
Bottom
Cover Plate
2. Re-install the control box cover that was removed
earlier. See
Figure 14. Control Box Cover Installation
Control Box
Cover
a. When installing the screws, be careful to not
strip the threads of the main unit. If any
screws do strip, install a slightly larger screw
to ensure the control box cover is fastened
securely and the foam underneath is
compressed.
b. Make sure that the bottom flange of the
control box cover is below the bottom plate
of the control box.
c. Make sure that the bottom lip of the bottom
plate is compressed against the foam on the
control box cover to provide a tight seal
around the bottom of the control box cover.