Trane ACYSTAT110AA, Owners & Installation Manual

Page: 9 / 34

ACYSTAT-IOM-EN
9
Note:
• In AUTO mode, the system will automatically switch
between COOL mode and HEAT mode to maintain
equally room temperature and set temperature.
CLOCK Setting
- Press MENU button and select CLOCK setting by
pressing either or .
- Press MENU button again to set clock and will be
shown on the display with blinking hour number.
- Press either or button to set the clock to the
present hour.
- Press MENU button again to confirm hour setting and
minute number will be blinking.
- Press either or button to set the clock to the
present minute.
- Press MENU button again to confirm minute setting;
hour and minute number will stop blinking and the set
time will be shown on the display.
Note:
• If there are no other buttons pressed within 15 second,
clock setting will be cancelled.
Timer Operation
Once you select the timer operation, the settings are saved
in the control. Thereafter, the air conditioner will start oper-
ating under the same conditions when you simply push the
POWER button on the control.
ON TIMER Setting
You can set ON TIMER to start the unit automatically at
any desired time up to 24 hours as real time.
- Press MENU button and select ON TIMER setting by
pressing either or .
- Press MENU button again to set ON TIMER and ON
symbol will be shown on the display with blinking
hour number.
- Press either or button to set the desired hour.
- Press MENU button again to confirm hour setting and
minute number will be blinking.
- Press either or button to set the desired minute.
- Press MENU button again to confirm minute setting.
Hour and minute number will stop blinking. The unit
is now standby for starting air-conditioner automatically
at the set time.
- To cancel ON TIMER, select ON TIMER setting and
press MENU button again.
Note:
• If there are no other buttons pressed within 15 seconds,
ON TIMER will be cancelled, and the LCD display will
return to show clock.
• After selecting ON TIMER setting, the LCD display
will show the last on timer set by user with blinking
hour number.
• When ON/OFF TIMER is set, the present time is not
displayed.
• In case of power failure, ON TIMER will be automatically
cancelled as there is no electricity in the air-conditioner.
OFF TIMER Setting
You can set OFF TIMER to stop the unit automatically
at any desired time up to 24 hours as real time.
- Press MENU button and select OFF TIMER setting by
pressing either or .
- Press MENU button again to set OFF TIMER and OFF
symbol will be shown on the display with blinking hour
number.
- Press either or button to set the desired hour.
- Press MENU button again to confirm hour setting and
minute number will be blinking.
- Press either or button to set the desired minute.
- Press MENU button again to confirm minute setting.
Hour and minute number will stop blinking. The unit is
now standby for starting air-conditioner automatically
at the set time.
- To cancel OFF TIMER, select OFF TIMER setting and
press MENU button again.
Note:
• If there are no other buttons pressed within 15 seconds,
OFF TIMER will be cancelled, and the LCD display will
return to show clock.
• After selecting OFF TIMER setting, the LCD display
will show the last off timer set by user with blinking
hour number.
• When ON/OFF TIMER is set, the present time is not
displayed.
• In case of power failure, OFF TIMER will be automatically
cancelled as there is no electricity in the air-conditioner.
Display Unit and Receiver Board
LCD Wired Control