2
5. Electrical Installation
• Before starting the electrical installation make sure the
power network tension [110V ˜ / 127V ˜ or
220V ˜ / 230V ˜ ] marked on the device is the same of the
power network.
• Make sure that the power line is exclusive and
connected to the switch board and the wire(s) and the
circuit breaker(s) are recommended for the device. [look
on the table of technical specifications].
• Make sure that the ground wire [green or green/yellow]
is connected directly to the wire or grounding bus of the
switch board.
• If the circut that feeds the device is Phase/Neutral
[110V ˜ / 127V ˜ or 220V
˜
/ 230V ˜ ] use only one circuit
breaker connected to the phase wire, if the circuit is
220V ˜ / 230V ˜ Phase/Phase is one bipolar switch.
• Turn the selector of temperatures for the position “off”
[pic. 04].
• For your safety, electrical installation and earthing
grounding must be executed by qualified persons.
• The junction box or derivation must be located 15 cm
above the wall-mounted water outlet connection outlet.
• The earthing grounding system ensures your safety when
using domestic appliances.
Extension
Pressure
Reducer
Senseday
Shower
Extension
Pressure
Reducer
Senseday
Shower
03
02
01
Extension
Pressure
Reducer
Senseday
Shower
Extension
Pressure
Reducer
Senseday
Shower
IMPORTANT FOR YOUR SAFETY
To reduce risk of electric shocks, this ground
wire [green wire] in this appliance must be
connected to a groundingn earthing system,
in accordance with the instalattion norm.
WARNING
Before starting electrical installation,
turn off the mains switch or circuit
breaker where the
Senseday Shower
is installed.
WARNING
05
04
Encaixar a capa
do Prolongador
no Alojamen
to
do Cor
po da Ducha
Attach the Extension
cover to the Housing in
the Shower Body
6. Replacing the Electrical Coil
• Turn off the mains switch or circuit breaker and cut the
water supply.
• Loosen the top nut rotating it counterclockwise
[pic.08].
• Hold the electric coil box assemble tight with one hand
and support rubber diaphragm with fingers [pic.09].
• Pull up the entire electrical box assembly. Pull the
resistance assembly until you undock it [pic.10].
Before replacing the electrical coil,
always cut water supply and turn off
the mains switch or circuit breaker
where the appliance is installed to
reduce the risk of electric shock.
WARNING
10
Prolongador
Capa do
Prolongador
Redutor
de Pressão
Ducha
Sense Day
Prolongador
Capa do
Prolongador
Redutor
de Pressão
Ducha
Sense Day
Prolongador
Capa do
Prolongador
Redutor
de Pressão
Ducha
Sense Day
08
09
English
Prolongador
Capa do
Prolongador
Redutor
de Pressão
Ducha
Sense Day
• Use appropriate conector [in porcelain] to connect the
connecting cables of the
Senseday Shower
to the
feed wires of the power network. This conector is not
supplied with the device. [pic. 07].
• The junction box should be at a height of 2,25m from
the floor.
06
07
Prolongador
Capa do
Prolongador
Redutor
de Pressão
Ducha
Sense Day
Prolongador
Capa do
Prolongador
Redutor
de Pressão
Ducha
Sense Day
Never use plug and socket
in the installation [pic 06]
FOR YOUR SAFETY
WARNING
Summary of Contents for senseday
Page 8: ...senseday ...
