TRAK Machine Tools
Site Preparation Guide
TRAK DPMRX3
F16467-45 Rev 020921
Page 2 of 4
DPMRX3 Overall Dimensions
G
Height of table from bottom of bed
36.75”
H
Maximum distance from spindle nose to table
25.8125”
I
Height of machine from bottom of bed to top of column cover
84.75”
J
Max. height of machine from bottom of bed to top of Z-axis motor
87.5”
K
Width of machine (Mechanical Handwheel)
70.875”
K1
Width of machine (Electronic Handwheel)
73.5”
L
Length with electrical cabinet closed (w/ Mechanical Handwheel)
72.4375”
L1
Length with electrical cabinet closed (w/ Electronic Handwheel)
76.625”
M
Maximum height of machine from bottom of leveling pads to top
of spindle motor with the head all the way up
100.5
”
N
Spindle center to column face
20.5”
Note:
Removing the z-axis motor, z-axis motor
cover, resistor housing, resistor housing lid, and
unscrewing the top resistor from its bracket and
placing it to the side results in a height of
80.4375” from the bottom of base to the top of
the Z-Axis ball screw. With the head all the way
down, this is the minimum clearance needed to
move the machine through doors.
