3
Setting the radio channel
1.
Press the "Shift" and "Speed knob" simultaneously, for the settings
menu.
2.
With rotating the speed knob, select the "r.ch" option.
3.
Press the "Speed knob", for entering the selected option.
4.
With rotating the speed knob, select the desired radio channel.
5.
Press the Speed knob, to save your settings.
6.
Press Power button to exit from settings. The controller will now
reboot. ( - - - - on display)
Synchronizing with NaWi wireless hub
1.
Check the wireless hub address. Make sure, the controller and the
hub is on same channel.
2.
Press the push button of selected slot on the wireless Hub.
3.
The pushed channel will now blinking. That means: Waiting for
controller.
4.
Hold the "Shift" key and press the Power button simultaneously on
the wireless controller.
5.
The controller now in Locomotive mode (Lxxx on display)
6.
Synchronizing is completed. The controller is registered on the Hub.
Changing the locomotive address
1.
Enter the settings menu. Press the Shift and Speed knob in same
time.
2.
With rotating the "Speed knob", select "L.Adr" option.
3.
Press the "Speed knob" for entering the selected option.
4.
Use a speed knob, or the F1-F4 keys to modify the locomotive
address. F1 is the thousands, F2 is the hundreds, etc.
5.
Press the "Speed knob" for exit and save.
6.
Press "Power button", to exit from settings.
7.
The controller is ready to use with entered locomotive address.