Chapter 3.3.1 Setting the ADSL VPI & VCI For RFC 1483/2364/2516
<Step01>
Double click the "
Conexant AccessRunner
" Icon in Control Panel.
- You can use
Alt-P
or
Alt-C
to make sure or change VPI / VCI.
- Make sure the VPI & VCI without problem.
<Step02>
This is the Network Protocol and PVC settings section. Enter in the VPI & VCI and Framing values
supplied by your ADSL service provider. Press "
Apply
".
When you install LAN mode, you can select several modes from "Ecapsulation mode", such as
"Bridged IP over ATM LLC SNAP (RFC1483)", "Routed IP over ATM LLC SNAP (RFC1483)",
"Bridged IP over ATM VCMUX (RFC1483)" or "Routed IP over ATM VCMUX (RFC1483)".
When you install WAN mode, you can select several modes from "Ecapsulation mode", such as
Summary of Contents for ADSL-USB
