MINI XRS Set up instruction
6
kart onto a table. Take down the nut and washer from the spindle and strut
support, insert the ball head into the mount position of lower suspension
arm (square part of ball head is placed to the square hole of suspension
arm), put on the washer and nut. Screw on the bolt with torque 37-44NM.
At last open the cotter pin 2X20 for fixing.
Pic.11
2.4 Assemble the front wheel (pic.12): Take off the nut M12x1.25 and
Φ
12 washer from the rear axle. Raise up the front part and set up the rear
wheel onto the rear axle, screw the washer and nut screw tightly with
55-62NM, cover the hub cover.
Pic.12
