www.TrailFX.com
Page
5
of
6
Rev 032618
Driver Side Installation Pictured
WARNING!
Do not crawl under bumper unless
the bumper is properly supported on blocks or
stands or the bumper may fall.
(Fig 14) Trim off plastic
wheel well liner (Optional)
(Fig 10) Attach sensor behind sensor sleeve
Centering Foam
Washer
Retaining Ring
Sensor
Front
(Fig 13) Driver/left side complete installation
(pictured from below Bumper)
(Fig 11) Attach License Plate Bracket to Bumper
(2) 6mm Button Head Bolts
(4) 6mm Flat Washers
(2) 6mm Nylon Lock Nuts
(2) Plastic Plugs
Front
Front
(Fig 12) Driver/left side complete installation
(3) 12mm x 40mm Hex Bolts
(6) 12mm x 37mm Flat Washers
(3) 12mm Nylon Lock Nuts
