www.TrailFX.com
Page
1
of
6
Rev 092215
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
DO NOT OVER
TORQUE
.
STANDARD OPERATING LOAD FOR TIGHTEN
BODY MOUNT NUTS & BOLTS VARIES FROM
45
TO
65
FOOT POUND.
60-180 min
DRILLING
REQUIRED
CUTTING NOT
REQUIRED
PARTS LIST:
Qty
Part Description
Qty
Part Description
1
Driver/Left Sidebar
5
12mm Hex Nuts
1
Passenger/Right Sidebar
6
10-1.5mm x 35mm Hex Bolts
1
Driver Front Mounting Bracket
6
10mm x 27mm OD x 3mm Flat Washers
1
Driver Front Support Bracket
6
10mm Lock Washers
1
Driver Center Mounting Bracket
7
8mm-1.25 x 30 Hex Bolt
2
Passenger Front and Center Mounting Brackets
12
8mm-1.25 x 25mm Hex Bolts
1
Driver Rear Mounting Bracket
20
8mm x 24mm x 2mm Flat Washers
1
Passenger Rear Mounting Bracket
18
8mm Lock Washers
6
12mm Plastic Retainers
1
8mm Nylon Lock Nuts
6
12mm x 35mm Bolt x 10mm Nut Plates
2
6mm x 25mm Hex Bolts
5
12mm x 32mm OD x 3mm Flat Washers
4
6mm x 22mm x 2mm Flat Washers
5
12mm Lock Washers
2
6mm Nylon Lock Nuts
PROCEDURE:
1.
Starting at the driver side-front of the vehicle, remove the sealing tape covering the factory holes on the side of the inner panel,
(Figure 1)
.
2.
Determine the correct procedure to attach the driver side front Bracket for your model/year:
Models without factory threaded inserts in body panel:
`
5" Oval W2W Nerf Bar
Part No. A7059S/B
Fits:
2009-2015 Dodge Ram 1500 Quad Cab 6.5' Standard Bed
POLISHED STAINLESS STEEL
– LIMITED LIFETIME
POWDER COATED BLACK
– 3 YEARS
1 866 638 4870
Passenger/Right
Front and Center
Brackets
Drive/Left
Center Bracket
(6) 12mm x 35mm Bolt x 10mm
Nut Plates
Passenger/
Right Rear
Bracket
Driver/Left
Rear
Bracket
Front
(6) Plastic Retainers
Driver/Left Front
Support Bracket
Driver/Left Front
Mounting Bracket
Passenger/Right Sidebar
