www.TrailFX.com
Page
3
of
6
Rev 010115
2.
Select the driver side front Mounting Bracket,
(Figure 2A)
. Insert the factory body mount bolt through the Mounting
Bracket, factory washer if equipped and up into the mount. Snug but do not fully tighten the body bolt at this time,
(Figure
2B)
.
VERY IMPORTANT!
To prevent unnecessary noise, adjust the position of all Mounting Brackets so that once
tightened, the Mounting Brackets cannot come in contact with the factory steel body mount bracket.
3.
Move to the center body mount. Remove the body bolt as previously described. Determine correct procedure for your
model and year.
2014-On 1500 Double Cab
:
a.
Select the driver/left Support Bracket,
(Figure 3A)
. Repeat
Step
2
to install the Center Support Bracket only,
(Figure 3B)
.
1999-2013 1500, 1999-2015 25-3500
:
a.
Select the driver side Center Mounting Bracket,
(Figure 3A)
. Attach the Mounting Bracket to the body mount
as previously described in
Step 2
,
(Figure 3C)
. Make sure the Bracket is straight and tighten the body bolt.
b.
Select the driver side Center Support Bracket,
(Figure 3A)
. Bolt the Support Bracket to the inside of the
Mounting Bracket with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers,
(Figure 3C)
.
Leave 8mm hardware loose.
Front
(Fig 2A) Driver/left Front Bracket
2014-on 1500 models
only (use top slot)
All other model years
use bottom slot
(except 2014-on 1500)
Front
Factory
body bolt
(Fig 2B) Driver/left Front Bracket installed
All model years
(except 2014-on 1500)
Mounting
Bracket
2014-on 1500 models only
(Mounting Bracket not required)
(Fig 3A) Driver/left Center Bracket assembly
Front
(Fig 3B) Driver/left Center Support
Bracket only as installed on 2014 1500
Factory body bolt
