FIGURE
FIGURE
FIGURE
3.
Refer to the above fastener detail illustration (Figure 2) for the fas-teners.
First, loosely attach the driver and passenger side mount-ing brackets to
the vehicle unibody channel using the supplied M12
cap screws, split lock
washers, and flat washers. Do not fully tight-en at this time.
4.
With the mounting brackets loose, attach the main hitch assem-bly to
each mounting bracket using the supplied M10 cap screws,
M10 split
lock washers, and M10 flat washers. Do not fully tighten
at this time.
5.
Adjust all components as desired. Tighten M12 fasteners to 60-65
lb-ft &
M10 fasteners to 30-35 lb-ft.
COMPLETE INSTALLATION
