www.TrailFX.com
Page
2
of
2
Rev 030816
LIGHT COVERS SOLD SEPARATELY
Check out these other TrailFX Products!!
www.TrailFX.com
WIRING INSTALLATION:
!!! Paired kits will have 2 Deutsch connectors on harness:
1.
Remove wiring harness and switch from kit.
2.
Route wiring harness so that the red and black power cables are
routed to the 12V battery, the three switch wires are routed to
your desired switch location, and the Deutsch plug(s) is routed to
the light.
(Keep wiring away from anything that will get hot).
3.
Mount relay with desired hardware in a position under hood or in
cab that is limited to water exposure.
4.
Plug male (on the wiring harness) and female (on light) Deutsch
plug(s) connectors together.
5.
Drill ¾” hole in desired switch mounting location. Verify there will
be enough clearance behind switch to plug in the wires. Notch a
small slit in the side of the hole using a file. This will keep the
switch from turning.
6.
Press switch into hole; verify that the notch made in step 5 lines
up with the notch on the switch.
7.
Plug wires into switch. Prongs on switch will be marked 1
through 3.
Red
wire goes to
prong 1, Blue
wire goes to
Prong
2,
and the
Black
wire goes to
prong 3
(gold prong).
8.
Attach power cable to the battery.
Red
goes to
positive
and
black
goes to
negative.
Do periodic inspections to the installation to make sure that all hardware is secure and tight.
Never use a caustic or petroleum based cleaner on any surface of the light.
For best cleaning results, always use household glass cleaner or mild soap with a soft lint free rag.
Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of
purchase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of fitness
for a particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product at our
option, when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this product
voids the warranty. KAO’s liability is limited to repair or replacement of products found to be defective, and specifically excludes
liability for any incidental or consequential loss or damage.
