3
4
CAMERA INSTALLATION
Power Negative
Power Positive
“+”
1.
Use the
supplied
screws to
fix
the camera
to the
vehicle.
2. Co
nnect
the
camera power cable to
the v
ehicle power system
(lights etc).
90°
90°
Light
Sensor
IR
'
Light
s'
IR
'
Lights
' (Night Vision)
The
light
sensor
underneath
the camera
lens
detect
s
light changes
and
will automatically
turn
on the IR 'lights'
at night
,
or in low light conditions,
so that the image is clearer
(B&W image).
Plug & Play
Notice:
Before
rotating the camera, loosen the fixing screw on the
side of the camera, hold the camera with one hand, rotate
it up or down, and tighten the screw after reaching the
best angle.
3. Connect the
power
cable to the monitor
&
insert the
cigarette lighter power
adapter
into
the vehicle
's
adapter socket. Switch
the monitor
on
and
t
hen
adjust the camera angle to the ideal
viewing
position, then fix it by tighten
ing
the
bracket
screw
s
.
Cigarette
L
ighter
Socket
1.
The m
onitor
can be fixed to the dashboard, windscreen or
air-vent.
2.
How to
install the mounts
:
1)
The
dashboard
mount
is already attached
to the monitor and can be stuck to
the dash
board
.
Choose and clean a
suitable location
on the dashboard,
remove
the paper
from
the
monitor stand sticky
pad
and
firmly
press
the
stand mount on
to
the dashboard.
2)
If using the
windscreen mount,
please
replace the dashboard mount by utilising
the supplied screwdriver.
03.
Used for reversing assistance
For in-vehicle monitoring
Dashboard Mount
Air Vent Mount
WIndscreen Mount
MONITOR
INSTALLATION
