Towbar Fitting Instructions
To Suit
TOYOTA CAMRY ASV50R & AVV50R & AURION GSV50R
Part Number
TT163L
Rating
1200/120
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9898 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
Rev: A Page 7 Issue Date: 28-07-2016
ALTISE MODEL ONLY
20. Identify centre of bumper, and make cutout in
centre of bumper 95mm tall x 100mm wide,
starting at bottom edge of bumper (as
measured on outside of bumper).
NOTE:
Variation of bumper cut due to model year
and variant may exist. It is highly recommended for
the installer to review the cut against vehicle and
proceed with caution.
ATARA MODEL ONLY
21. Identify centre of bumper, and make cutout in
centre of bumper 105mm tall x 100mm wide,
starting at bottom edge of bumper (as
measured on outside of bumper).
NOTE:
Variation of bumper cut due to model year
and variant may exist. It is highly recommended for
the installer to review the cut against vehicle and
proceed with caution.
AURION MODEL ONLY – EXCLUDING
SPORTIVO
22. Identify centre of bumper, and make cutout in
centre of bumper 105mm tall x 100mm wide,
starting at bottom edge of bumper (as
measured on outside of bumper).
NOTE:
Variation of bumper cut due to model year
and variant may exist. It is highly recommended for
the installer to review the cut against vehicle and
proceed with caution.
Centreline
of bumper
Bottom edge
of bumper
105mm
100mm
Centreline
of bumper
Bottom edge
of bumper
105mm
100mm
Centreline
of bumper
Bottom edge
of bumper
95mm
100mm
