Towbar Fitting Instructions
To Suit
MAZDA CX-8 CL4
Part Number
QTMA662L
Rating
2000
/
100
kg
PLACE THESE INSTRUCTIONS IN THE VEHICLE’S GLOVEBOX AFTER INSTALLATION IS COMPLETED
Cequent Customer Service
Ph
:
1800 812 017 Fax
:
03 9898 3299
:
info@cequent
.
com
.
au
Post
:
PO Box 4050, Dandenong South VIC 3175
Rev
:
A Page 4 Issue Date
:
14-02-2019
8. Under vehicle, remove the LH and RH
side body trim secured with 2 x screws
and 1 x scrivet.
9. Remove 2 x scrivets along bumper.
10. Disconnect and remove wiring harness
from the vehicle mounting (located inside
bumper on the LH side).
11. Peel away bumper from the ends and
remove from vehicle.
12. Remove and discard the impact beam,
secured with 4 x flange nuts per side.
Retain the nuts for later use.
