Trailboss HD86 Fitting Instructions Download Page 2

Page: 2 / 5

Towbar Fitting Instructions

To Suit TO SUIT HOLDEN EPICA

Part Number HD86

Rating 1200kg

Page

2 of 2

Issue Date 30-08-07

THE WORKHORSE OF AUSTRALIA’S TOWBARS

FOR TOWING PURPOSES ONLY

For towing capacity details please refer to vehicle
owner’s manual or to the manufacturer. Overloading
can void your warranties.

Fig 1, 2 & 3: Shows bolts that need to be removed from the side mudflaps of the vehicle

Fig 4: Two screws beside tail lamp shown. Fig 5: Remove tab shown below.

RECOMMENDED ASSEMBLY TORQUE LISTING

Diameter Grade 8.8 Bolt

9.5 Nm

21.7 Nm

M10

43.4 Nm

M12

77.3 Nm

M16

189.8 Nm

Place load rating sticker

inside driver’s door here

Summary of Contents for HD86

Page 3: ...LIA S TOWBARS Fig 6 Remove 2 tabs from inside of boot Fig 7 Remove rubber plugs shown below Fig 8 Remove 4 bolts as shown from inside of boot Fig 9 Remove wiring wrap it around towbar using cable ties provided if necessary Fig 10 Remove discard impact beam shown Fig 11 Remove charcoal canister by removing bolt at the bottom of the figure shown ...

Page 4: ... of 2 Issue Date 30 08 07 THE WORKHORSE OF AUSTRALIA S TOWBARS Fig 12 Remove bolt shown on both sides Fig 13 shows towbar being fitted on Fig 14 Line up the packer assembly as shown below Fig 15 shows towbar mounted from inside of boot Fig 16 Shows towbar being mounted up from bottom of chassis ...