manualshive.com logo in svg

Trail Tech Vapor, User Manual

Share
Download
Trail Tech Vapor User Manual Download Page 44

42

Normal Mode

Glossary of Terms

ACCUMULATED RIDE TIME (ART)
The long-term total amount of time spent riding (all ride times added
together).  Cannot be reset.

BACKLIGHT
The light that brightens up Vapors display.  When connected to vehicle’s
12 volt system the backlight can be activated by pressing any button,
will be 5 times brighter, and will stay on continuously.

SPEED (SPD)
The current speed the vehicle is traveling.

DATA SETTING MODE
The place to set Vapors’ settings.  Includes distance units, wheel size,
clock format, time, PPR, temperature units, high temp setting, over
temp setting, RPM shift indicator and RPM over shift indicator.

DISTANCE (DST)
The amount of trail covered since the last reset.

HIGH/OVER TEMP INDICATORS
The LED’s will blink when the bike gets too hot and again when it gets
dangerously hot.  Set custom temperatures in Data Setting Mode.

MAXIMUM SPEED (MS)
The max speed achieved since the last reset.

Summary of Contents for Vapor

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands