Installing Lithium Batteries
3.
Unplug the charger from the wall
before
you disconnect the charger from the Speed Tracker.
Installing Lithium Batteries
Your Speed Tracker comes with a rechargeable lithium battery already installed inside the Speed Tracker
enclosure and secured in place with velcro straps. Use the following instructions should you ever need to
replace the battery in the enclosure.
[Figure 9] Lithium battery inserted and connected
W
ARNING
:
Lithium batteries come with a protective wrap on the outside of the unit. this
protective wrap
should never
be removed as doing so damages the batteries and creates a
potential hazard. The Lithium batteries supplied with the Speed Tracker are stable and safe
when handled and used properly. Do not bend the batteries or attempt to puncture them with
sharp objects as this could cause a fire and/or explosion.
To install a battery in the enclosure:
1.
Make sure that the battery has been removed from its packaging, then open the enclosure.
2.
Make sure the velcro straps in the battery enclosure are separated.
3.
Place the battery inside of the enclosure, laid flat against the back of the enclosure.
4.
Use the velcro straps in the enclosure to secure the battery in place.
5.
When the battery is secured in place, connect the battery connectors to power on the Speed Tracker.
Speed Tracker Installation Guide
p. 19
