11
2014-2015 Copyright Traffic Logix® Corp. SafePace® 700 Variable Message Radar Speed Sign
Installation Manual V. 1.1
Figure 12
Figure 13
Pass the solar panel wiring through the hole of the cable gland (
Figure 13
), and then continue to feed
the wiring through the conduit (
Figure 14
)
Figure 14
Secure the cable gland’s cap tightly onto the conduit, once the wiring is inside the sign’s enclosure.
After the conduit is secured, feed the wires from inside the conduit through the holes in the battery
shelves and pull them through to the electrical compartment into the lower area of the enclosure.
WARNING
: Before ever doing any maintenance on a sign, it is critical that the power
is first turned off. This will prevent accidental electrical shock that can be fatal and
that can also damage electrical components.
Note: Ultra-violet
(UV) and moisture
resistant
protective wiring
cables are
provided by
default
