background image

13

TRAEGERGRILLS.COM   

USING YOUR GRILL

YOU WILL NEED TO BEGIN WITH THESE STEPS EVERY TIME YOU USE YOUR GRILL.

Press any button to wake the controller. 

1

PLUG APPEARANCE MAY VARY BY REGION.

Plug power cord into an appropriate grounded/earthed 

electrical outlet and flip Main Power switch to ON (

I

).

2

NOTES: 

• 

The Traeger app for your mobile device makes 

operating your WiFIRE® Electronic Controller 

even easier. To connect to your grill, download the 

Traeger app and follow the instructions. To learn 

more about WiFIRE®, the Traeger app, and more 

ways to connect, go to traegergrills.com/wifire.

• 

Whatever cook method you choose, your Traeger® 

Pro Series Grill will always begin with an ignition 

and preheat cycle once you press IGNITE. 

• 

Always run your grill through the full shut-down 

cycle after each cooking task. Press and hold the 

dial to initiate the shut-down cycle.

• 

We recommend you clean the grease drip tray 

frequently to reduce the possibility of a grease fire. 

Please see “Maintaining Your Grill” on page 20 for  

more details.

WARNING! 

• 

When operating this grill, maintain a minimum 

clearance of 18 inches (45.7 cm) from grill to 

combustibles.

• 

Use ONLY TRAEGER® BRAND HARDWOOD 

PELLETS, which are specifically made to work in 

our grills. Never use heating fuel pellets in the grill.

Summary of Contents for WiFiRE











Reviews: