background image

 

INTRODUCTION 

 
Congratulations on your purchase of this Traeger Outdoor Fire Pit, Model OFP001. 
With proper set-up, operation and maintenance, the Fire Pit will provide you with years of 
enjoyment. 
 

NOTE: NUMBERS FOLLOWING PART NAMES REFER TO THE COMPONENT 
DIAGRAM FOUND NEAR THE END OF THIS MANUAL. 
 

When you un-box the Fire Pit, remove all parts from the box and inside the Fire Pit. 
Remove any remaining packaging material from inside the Fire Pit as well. Make sure you 
have, and can identify all of the following parts: 
 

Qty

    

Item Description

                      

Component Diagram Reference Number 

 
(1)     Fire Pit Base Assembly---------------------------------------1 
(1)     Fire Pit Pellet Pan Assembly--------------------------------  2 
(3)     Fire Pit Foot Assemblies------------------------------------- 

(1)     Fire Pit Lid Assembly------------------------------------------  4 
(1)     Porcelain Grill------------------------------------------------------ 5 
(1)     Ash Pan round----------------------------------------------------  6 
(1)     Poker rod------------------------------------------------------------ 9 
(1)     Hardware Kit--------------------------------------------------------NA  
 
You will need to complete the assembly which includes: 
1)  Mounting the Fire Pit Foot Assemblies to the Fire Pit Base. 
2)  Installing the Ash Pan Round under the Fire Pit Base. 
3)  Installing the Fire Pit Pellet Pan Assembly to the Fire Pit Base. 
4)  Positioning the Porcelain Grill onto the Fire Pit Base. 
5)  Positioning the Fire Pit Lid onto the Fire Pit Base. 
6)  Assemble poker rod. 

 
TOOLS ARE SUPPLIED FOR ASSEMBLY 

(1)  One 7\16 open or box wrench. 
 
 

Record your date of purchase here:_____________________________________________ 

 

Record your serial number here:_____________________________________________ 
 

Traeger Pellet Grills LLC warrants this Outdoor Fire Pit against defects in material and workmanship under 
normal use and maintenance for a period of (1) year from date of original purchase. All Fire Pits must be 
registered at time of purchase. 

 
 
 

Please register your Fire Pit at www.traegergrills.com. 

Summary of Contents for OFP001










Reviews: