OPERATING INSTRUCTIONS, Continued
2.
Bring the sealer handles completely together to
assure a proper crimp.
3.
Remove the sealer. Place the sealer on the seal
and apply remaining crimps (1 or 3) in
appropriate positions by bringing the handles
completely together. Remove the sealer when
through.
NOTE: If the gauge of the strap being used will not
allow it to be bent, cut the strap supply as close to
the seal as possible using an approved strap cutter.
4.
To avoid contact with the sharp end of the strap,
retract the strap end back into the strap
dispenser.
PARTS LIST
KEY QTY
PART#
DESCRIPTION
1
3
003911
Grip lock nut
2
2
020386
Side plate
3
2
020387
Jaw pin
4
3
003974
Fulcrum pin
5
4
020388
Tie bolt spacer
6
1
020391
Locking pawl
7
1
020392
Locking pawl spring
8
4
020385
Jaw
9
4
004049
Link pin
10
1
422002
Upper handle arm assembly
KEY QTY
PART#
DESCRIPTION
11
1
020384
Large toggle link
12
1
020393
Short toggle link
13
1
020383
Crimper
14
1
020389
Holding pawl spring
15
1
020390
Holding pawl
16
3
003972
Tie bolt
17
2
020378
Grip
18
1
584-1188
Nameplate
19
1
422004
Lower handle arm assembly
20
1
003132
Caution plate
When ordering parts, please show tool model, part number and name. All recommended spare parts are underlined
and should be stocked.
For Parts Support Call 1-800-541-5736
MAINTENANCE
Inspect tool daily for worn or broken parts
and replace if necessary. Clean and apply light
machine oil to all moving parts - weekly.
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM
