OPERATING INSTRUCTIONS
Always wear safety glasses which conform to ANSI
Standard Z87.1 or EN 166. Position yourself to one
side of the tensioned strap while sealing. Maintain
proper footing and balance.
1.
Fully open the sealer handles and center the open jaws
on the seal.
2.
Bring the sealer handles completely together to assure a
proper crimp.
3.
Remove the sealer. Cut the strap end flush with the end
of the seal and inspect the seal to make sure a proper
joint has been formed.
4.
To avoid contact with the sharp end of the strap, retract
strap end back into the strap dispenser.
PART LIST
KEY
QTY.
PART NO.
DESCRIPTION
2
1
009392
Spacer washer, 3/16 standard
3
1
023803
Toggle pin
4
2
423541
Jaw
5
2
023805
Link pin
6
2
023804
Jaw pin
7
1
023809
Hex head bolt, 1/4-20 x 1 5/8
8
1
423542
Chair
9
1
005319
Flexloc nut, 1/4-20
10
2
423539
Side plate
11
2
423812
Handle assembly
12
1
003133
Caution plate
13
1
436129
Nameplate
!
When ordering parts, please show tool model, part number and name.
!
All recommended spare parts are underlined and should be stocked.
!
Standard hardware parts may be obtained from local hardware suppliers.
MAINTENANCE
Inspect tool daily for worn or broken
parts and replace if necessary.
Clean tool and apply light machine oil
to all moving parts - weekly.
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM