TRADINGZONE SMARTLINE SITTING/STANDING CORNER TABLE STESI, Assembly And Operating Instructions Manual

Page: 35 / 56

35
SOLUTION. CLICK CODES
As soon as the controller is supplied with power, the controller uses its built-in relays to audibly inform the user about the
system status. The following table shows the correlation between the number of clicks and what they mean.
NUMBER OF CLICKS STATUS INFORMATION
2x close together
(quick double-click)
Normal operating mode:
The system is working properly. The signal is only produced right after the
controller is supplied with power.
2x far apart
(slow double-click)
Reset mode:
The system is currently in reset mode.
This signal is always produced when the table should not be lowered in the
reset direction
(up button and/or memory buttons)
3x close together
(quick triple-click)
Sensor missing:
The crush protection sensor is not connected to the controller.
This signal is always produced when the table is to be moved
(up/down button and/or memory buttons)
3x far apart
(slow triple-click)
Maximum allowable operation time reached:
This signal is always produced when the table is to be lowered (down button)
Note: The click codes produced when saving memory positions or saving/deleting pedestal- and shelf-stop positions are
described in the relevant sections.