User Manual
TRAQC-3 FM
TRAQC-3 LH 10/2014 EN Rev.2
page : 8
9)
For decreasing the temperature the same procedure as described above must be
followed.
Note : Please do not disconnect or switch off instrument until the indicated
temperature of the block is below 50 °C.
Note : The environment (temperature and draught), length and the mass of
the probe may influence the measurement considerably.
Note: If the manufacturer has enabled the most left button, one has access
to a part of a menu structure. Use of this feature is not required, Any change
may seriously change the behaviour of the instrument.
2.5.
Temperature switch
Connect the temp-switch to the terminals and insert the switch in the hole
Set the TRAQC-3 for the desired temperature and let it stabilize.
Adjust the temp-switch so that the indicator-light switches at the desired temperature
