TRAQC-20 LPC
TRAQC-20 LPC 0 13-08-2019 Page: 21
1 --> 2400
2 --> 4800
3 --> 9600
4 --> 14400
7 --> 38400
8 --> 56000
9 --> 57600
:sbu<0 ... 1>
Set baud rate USB
0 --> 1200
1 --> 2400
2 --> 4800
3 --> 9600
4 --> 14400
5 --> 19200
6 --> 28800
7 --> 38400
8 --> 56000
9 --> 57600
:sci<n | u | r>
Select active interface
Set communication interface
n --> Interface off
u --> USB active
r --> RS-232 active
sdb <0 ... 100>
Display brightness
0 ... 100 --> brightness in %
:spu <0 ... 9>
Pressure unit
0 --> Pa
1 --> hPa
2 --> ka
3 --> mbar
4 --> bar
5 --> Torr
6 --> mmHg
7 --> inHg
8 --> psi
9 --> mmH2O
10 --> inH2O
:ssl <d | e>
System language
d = German
e = English
Menu settings
:smm <a | c | m >
Define the operating modes of the instrument
a --> start automatic mode
c --> start control mode
m --> start measure mode
:ssw <1 ... 100>
Step size
1 ... 100 --> step size from operating the up and down
buttons in %
:swm <a | c | m | z l v | s>
Define the operating modes of the instrument
a --> start automatic mode
c --> start control mode
m --> start measure mode (only available in
CONTROL
and
MEASURE
modes)
z -->
ZERO
(only available in
CONTROL
mode)
l -->
LEAK
test
l --> back to
CTRL
mode (like
LEAK
button)
v -->
VENT
(vent the entire system) (only available in
AUTOMATIC
mode)
:szc <0,1>
Zeroing before entry into control mode
0 --> off
1 --> on
:szi <1 ... 60>
Zeroing interval
1 ... 60 --> time in minutes
Additional commands
:sce <0,1>
Set Communication Interface Echo
0 --> Echo Off
1 --> Echo On
