Product Code: 6046
Made in China to TQB Brands Pty Ltd specifications
Page 4
Visit us at www.tqbbrands.com.au
6.
Use three Screws (11) through each Leg (3,4) from underneath to secure them.
Assembly:
Add Bins and Rack:
7.
Use 4 screws (23) to assemble Steel Racks L and R (19,20).
8.
Mount Steel Racks L and R (19,20) on to the Workshop Trolley’s Post (3,4) with Screw
(13) accordingly.
9.
Assemble the Peg Wall (16) and Vertical Support Bracket (17) with Screw (18).
10.
Insert the Peg Wall (16) in the groove on both L & R side of the Steel Rack (19,20)
then lock with Screws (21).
11.
Hang on the Polyethylene Storage Bins (14,15).
Your Workshop Trolley is ready for use.
Warning
-
Do not exceed the product's rated
maximum load capacity.
3.
BEFORE USE
Prior to each use conduct a visual inspection by checking for abnormal conditions, such as
cracked joints and damaged, loose, or missing parts.
4.
STORAGE
This 32 Bin Polyethylene Workshop Trolley should always be stored in a dry location on a
level surface.
Please note:
Handle may vary
depending on model
