Jul-18
Product Code: 6003T
Made in China to TQB Brands Pty Ltd specifications
Page 5
Visit us at www.tqbbrands.com.au
3.
BEFORE USE
Before using this
Hydraulic Scissor Lift Trolley
, the hydraulic ram must be purged of air
(called bleeding).
Housing Filler Bolt
1.
Remove any load from the Table.
2.
Release the Control Lever, then repeatedly pump the Foot Pedal.
3.
When the table has been raised, remove the Filler Bolt from the Housing. Use a rag
to catch any fluid leaks.
4.
Keeping hands and tools clear, squeeze the Control Lever while pumping the Foot
Pedal several times rapidly to lower the Table.
5.
Release the Control Lever, and pump more slowly to raise the Table to its full height.
6.
Add good quality hydraulic fluid into the opening in the Housing where the Filler Bolt
has been removed. Fill until the Housing will hold no more fluid.
7.
Replace the Filler Bolt and its Seal Washer into the Housing, tighten, but do not
overtighten to avoid damaging the Washer.
8.
Check the condition of the Hydraulic Lift Table before use. Raise and lower it several
times before adding any load. Be sure that all controls work properly.