03/20
Product Code: 2081T
Made in China to TQB Brands Pty Ltd specifications.
Page | 5
Visit us at
4.
STORAGE
This Transmission Jack should always be stored with the Lift Arm fully lowered in a dry location on a level surface.
5.
MAINTENANCE
Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will
invalidate the warranty.
CHANGING THE HYDRAULIC OIL
1.
Change the hydraulic jack oil at least once a year.
2.
Fully lower the transmission lifter, remove the oil fill plug on the side of the hydraulic ram.
3.
Tip the Transmission Jack to allow the old hydraulic oil to drain out of the housing completely, dispose of the old
hydraulic oil in accordance with local regulations.
4.
With the Transmission Jack upright, completely fill the hydraulic ram with a high quality hydraulic oil (not included) until
the oil just begins to run out of the oil fill hole.
5.
Open the release valve and pump the handle to bleed air from the system.
6.
Reinstall the oil filler plug.
7.
Clean with a clean cloth using a mild detergent.
8.
Always store the Transmission Jack in a safe, dry location.
6.
SERVICE & REPAIR
Any Transmission Jack found damaged in any way, or found to be worn or operates abnormally should be removed from
service until repaired by an authorised service agent. Owners and / or operators should be aware that repair of this product
may require specialised equipment and knowledge. Only authorised parts, labels and decals shall be used on this equipment.
Annual inspection of the Transmission Jack is recommended and can be made by an authorised repair facility to ensure that
your equipment is in optimum condition and that the equipment has the correct decals and safety labels specified by the
manufacturer.
PARTS DIAGRAM
