June-22
Product Code: 2057T
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Page 3
Safety glasses must be worn when operating this
equipment
Safety footwear must be worn when operating
this equipment
Long loose hair must be contained when operating
this equipment
Close fitting/protective clothing must be worn
when operating this equipment
Rings and jewellery must not be worn when
operating this equipment
PRE-OPERATIONAL SAFETY CHECKS
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
1,000kg
Transmission Lifter
before using.
•
DO NOT exceed the maximum lifting load capacity of 1000kg.
•
Only use this Transmission Lifter on a surface that is stable, level, smooth, dry and capable of sustaining the load. Keep the
surface free from unrelated materials and ensure that there is adequate lighting.
•
DO NOT use on tarmac, or any other soft surface as the transmission may sink or topple.
•
Vehicle must be properly and adequately supported before commencing work with this Transmission Lifter.
•
This Transmission Lifter is used as an aid in the removal and installation of a transmission or a differential, as individual
components. DO NOT use it for any other purpose than it is designed for.
•
Always centre the load on the cradle of this Transmission Lifter and be sure the transmission is stable and secure before raising
or lowering.
•
DO NOT use the Transmission Lifter to lift or support a heavy load such as a differential with axle or a transmission with bell
housing which is bulky and difficult to balance, and may cause the transmission lifter to tip over and lead to equipment damage
and/or serious personal injury.
•
Never move this Transmission Lifter with a load any higher off the ground than necessary and always move it slowly and
carefully.
•
Transfer the load immediately to appropriate support device for service or repair.
•
DO NOT operate this Transmission Lifter when you are tired or under the influence of alcohol, drugs or any intoxicating
medication.
•
DO NOT allow untrained persons to operate this product and DO NOT make any modifications to this product.
•
DO NOT tamper with the safety valve.
•
DO NOT expose the Transmission Lifter to rain or any other kind of inclement weather.
•
When servicing, use only TradeQuip identical replacement parts. Use of any other parts will void the warranty.
•
Use the right product for the job. There are certain applications for which this Transmission Lifter was designed. Do not modify
the Transmission Lifter and do not use the Transmission Lifter for a purpose for which it was not intended.
Warning: Vehicle must be properly and adequately supported before commencing work with this Transmission Jack.
INTENDED USE
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are
raised by an in-ground or above-ground lift.
DO NOT
use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
STANDARD OPERATING PROCEDURE