04/20
Product Code: 1192T
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
PRE-OPERATIONAL SAFETY CHECKS
Save these instructions. For your safety, read, understand, and follow the information provided.
Before using the engine stand ensure it is in sound condition, and good working order.
Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate
the warranty.
Keep the stand clean for best and safest performance.
Locate the stand in an adequate working area for its function, keep area clean and tidy and free from unrelated materials,
and ensure there is adequate lighting.
Use on a firm, level surface capable of sustaining the engine stand and the load.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
Ensure all non essential persons keep a safe distance whilst the stand is in use.
Lock mounting plate in position before fixing a load, and ensure the load is centred and securely mounted on the locking
plate.
Always ensure the Stand and the load is stable.
To move a loaded stand, push it from the load side, above the two fixed wheels. DO NOT move the stand from the castor end
and never pull the stand towards yourself. Also ensure surface over which the stand is to travel is strong enough to take the
stand load and that it is not cracked, uneven or obstructed.
DO NOT operate unit if damaged.
DO NOT allow untrained persons to operate the stand.
DO NOT exceed the rated capacity of 900kg.
DANGER: DO NOT work under an engine mounted on the stand.
Intended Use
For safe handling and positioning of most 6 and 8 cylinder passenger car engines during dismantling and re-assembly.
STANDARD OPERATING PROCEDURE
DO NOT use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
Safety glasses must be worn when operating this
equipment
Long loose hair must be contained when operating
this equipment
Safety footwear must be worn when operating
this equipment
Close fitting/protective clothing must be worn
when operating this equipment
Rings and jewellery must not be worn when
operating this equipment
