Installation
35
Front VGA cable
Removing the front VGA cable
To remove the front VGA cable:
1.
Power down the server and detach all of the power cords from the power
supplies.
2.
Remove the access panel (on page 23).
3.
Remove the system fan assembly (on page 28).
4.
Remove the system fan cage (on page 29).
5.
Remove the system fan cage support bracket (on page 31).
6.
There are three screws securing the front VGA cover to the chassis. See the
following figure to locate the screws, and then use a screwdriver to loosen
and remove them (1).
7.
Hold the front VGA cable, and then gently remove the cover from the chassis
(2).
