Model TEEPEE-1 Teepee Style Bed Frame
Revised 06/04/2017
Page
9 of 10
Step 5: Fasten bottom panel 1 [I] and bottom panel 2 [J] to frame using short screws [C], (20) per
side through pre-drilled holes. Note that each top panel is matched to a bottom panel: both will be
marked on the inside either '1' or '2'. These should be placed on the same side.
Leave appropriate 'panel gap'
between top and bottom side pieces
Use assmbly jig [G] below panels to temporarily
support during assembly. Jig height may not
be exact and final panel positioning may require
adjustment.
